UFC 430AR Module

USB-interface module in aluminum housing

Request of Quotation
Contact
UFC 430AR Module

Overview

Hardware

  • Black anodized aluminum housing for surface- or wall mounting
  • Dimensions: 200 x 100 x 28 mm (to outside of mounting flanges)
  • Safety class: IP 30
  • Max. operating temperature: +40 °C
  • Socket for external power supply
  • One terminal connector, male, 2-way for external power supply (10–26 VDC)
  • One USB connector, type B
  • Three D-Sub terminal strips, female, 9-pin for counter inputs
  • One D-Sub terminal strip, male, 9-pin for I/O signals

Power supply

  • External power supply with 10 – 26 VDC, max. 500 mA
  • Power consumption for encoders with 5,2 V ±5%: max. 150 mA

USB-interface

  • USB-interface according specification 2.0

Encoder-interface

  • 3 RS422 (line driver) or analog inputs (1 Vpp) for encoder signals and reference mark(s)
  • Input frequency:
    Encoders with TTL signals: max. 4 MHz (⇒ slope time ≥ 62.5 ns)
    Encoders with analog signals (1 Vpp):
    • max. 300 kHz at times 20 interpolation
    • max. 240 kHz at times 25 interpolation
    • max. 300 kHz at times 40 interpolation
    • max. 240 kHz at times 50 interpolation
    • max. 300 kHz at times 80 interpolation
    • max. 240 kHz at times 100 interpolation
    • max. 120 kHz at times 200 interpolation
    • max.   60 kHz at times 400 interpolation
  • 1 TTL input for encoder interference signal
  • Encoder power supply: 5.2 V; max. 0.15 A

IO-interface

  • Three inputs (3 – 30 V) that can be used for ref. pulse inhibit, counter load signal, synchronous or asynchronous latch signal or for special assignment
  • Three outputs (TTL) to cascade several cards or for special assignment
  • Two analog outputs (0 – 5 V ±0.1 V), 8 bits resolution, output resistance max. 5 mA
Request of Quotation
Contact
UFC 430AR Module

Downloads

Product Sheets
UFC 430
232.53 kb