MSA 375
Integrated guide rail system
- Mounting via mounting holes on the extrusion ends
- Mounting of the reading head via coupling bar (optional accessory)
- Max. measuring length: 1 240 mm
Technical Data
| Model | Output signals | Accuracy grades | Grating pitch | Integrated interpolation | Max. velocity | Edge separation amin |
| MSA 375.65 | TTL | ±10 µm/m | 100 µm | times 5 | 1 m/s | 1.6 µs |
| MSA 375.55 | TTL | ±10 µm/m | 100 µm | times 25 | 1 m/s | 800 ns |
- Standard measuring lengths (ML): [mm]
70 to 1240 - Scale unit: glass scale (α≈8.5×10-6/K)
- Free positionable actuator magnets for special functions:
- the position of the two switch-points (S1 and S2) can be selected by the customer within measuring length
- Reference marks:
- Standard: one reference mark in the middle of measuring length, or 35 mm from either end of measuring length
- Optional: one reference mark at any location, additional reference marks can be selected by distances of n x 50 mm
- Sealing (according EN 60529):
- Standard sealing lips: IP 53
- With DA 400: IP 64
- Permissible temperature: -20 °C (storage), 0 °C to +50 °C (operation)
- Weight (approx.): 250 g + 1.34 g/mm (ML) + 210 g (reading head without cable)
- Standard cable: 3 m cable with Sub-D male connector 15-pin
- RoHS-conformity: the linear encoders MSA 375 comply with the guideline of the RoHS-directive (2011/65/EU) on the restriction of the use of certain hazardous substances in electrical and electronic equipment
Downloads
| Mounting Instructions | |
|---|---|
MSA 373, MSA 374, MSA 375 |
3399.49 kb |
| Catalogues | |
|---|---|
Sealed Linear Encoders |
3370.27 kb |
| Product Sheets | |
|---|---|
MSA 373, MSA 374, MSA 375 |
507.11 kb |