MCS 15
Absolute modular angle encoders MCS 15 in segment version
Request of Quotation
Contact
MCS 15
Overview
Absolute modular angle encoders MCS 15 without integral bearing are used as position and rotator control for electrical drives and in the measurement technology.
- Absolute position valuation
- Various serial interfaces
- Function display directly at the scanning head via status LED
- Easy mounting and large mounting tolerances
- Possible shaft diameter ≥ 75 mm
Request of Quotation
Contact
MCS 15
Technical Data
| Interface | EnDat 2.2 | Fanuc serial interface αi interface |
Mitsubishi high speed interface | Panasonic serial interface | Yaskawa serial interface |
| Version | EnDat 2.2 | Fanuc 05 | Mit03-4, Mit03-2 | Pana02 | YEC07 |
| Model | AK MCS 15 | AK MCS 15 F | AK MCS 15 M | AK MCS 15 P | AK MCS 15 Y |
| Measuring step (based on neutral axis) | 0.1 µm (100 nm) 0.05 µm (50 nm) |
||||
| Clock time tcal | ≤ 5 µs | -- | -- | -- | -- |
| Clock frequency | ≤ 16 MHz | -- | -- | -- | -- |
| Traversing speed | ≤ 600 m/min | — „ — | — „ — | — „ — | — „ — |
| Interpolation error | Approx. ±1 µm | — „ — | — „ — | — „ — | — „ — |
| Electrical connection | Cable 1 m or 3 m with M12-connector 8-pin or D-sub-connector 15-pin |
— „ — | — „ — | — „ — | — „ — |
| Length RSF extension cable | ≤ 100 m | ≤ 50 m | ≤ 30 m | ≤ 50 m | ≤ 50 m |
| Voltage supply | DC 3.6 V to 14 V | DC 3.6 V to 14 V | DC 3.6 V to 14 V | DC 3.6 V to 14 V | DC 3.6 V to 14 V |
| Power consumption max. | At 3.6 V: ≤ 800 mW At 14 V: ≤ 900 mW |
At 3.6 V: ≤ 950 mW At 14 V: ≤ 1050 mW |
At 3.6 V: ≤ 950 mW At 14 V: ≤ 1050 mW |
At 3.6 V: ≤ 950 mW At 14 V: ≤ 1050 mW |
At 3.6 V: ≤ 950 mW At 14 V: ≤ 1050 mW |
| Current consumption typ. | At 5 V: 80 mA (unloaded) | At 5 V: 100 mA (unloaded) | At 5 V: 100 mA (unloaded) | At 5 V: 100 mA (unloaded) | At 5 V: 100 mA (unloaded) |
| Vibration | 55 Hz to 2000 Hz ≤ 500 m/s²; (EN 60 068-2-6) |
— „ — | — „ — | — „ — | — „ — |
| Shock | 6 ms ≤ 1000 m/s² (EN 60 068-2-27) |
— „ — | — „ — | — „ — | — „ — |
| Operating temperature | −10 °C to 70 °C | −10 °C to 70 °C | −10 °C to 70 °C | −10 °C to 70 °C | −10 °C to 70 °C |
| Mass | Scanning head: ≤ 18 g (wihout cable) Connecting cable: 20 g/m M12-connector: 15 g D-sub-connector: 28 g |
— „ — | — „ — | — „ — | — „ — |
| Protection EN 60529 | Scanning head: IP 40 Complete encoder after mounting: IP 00 |
— „ — | — „ — | — „ — | — „ — |
| RoHS-conformity | MCS 15 encoders comply with the guideline of the RoHS-directive 2011/65/EU and also with the delegated directive 2015/863/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment. | ||||
| Product parameters | Product values and -details |
| Ordering designation | MB MCS 15 SK |
| Grating carrier | Steel tape scale with adhesive tape (pre-bent) |
| Coefficient of expansion | α ≈ 10 x 10−6 K−1 |
| Possible shaft diameter | ≥ 75 mm |
| Accuracy of the grating (based on neutral axis) | ±15 µm/m |
| Mass (approx.) | 20 g/m |
Request of Quotation
Contact
MCS 15
Accessories
-
Mounting aid MH MCR 15
Mounting aid for the scanning head of MCR 15 und MCS 15 (diameter-dependent).