MSR 45 MKS

Modular Angle Encoders without integral bearing in segment version

Request of Quotation
Contact
MSR 45 MKS

Overview

Modular Angle Encoders MSR 45 MKS without integral bearing are used as position and rotator control for electrical drives and in the measurement technology.

  • Measuring range: <360°
  • Grating pitch: 200 µm
  • Accuracy of the grating (stretched): ±30 µm/m
  • Grating carrier: steel tape scale with adhesive tape
Request of Quotation
Contact
MSR 45 MKS

Technical Data

Model Output signals Grating pitch Integrated interpolation Max. circumferential speed Max. output frequency Edge separation amin
MSR 45 1Vpp ∿ 1 Vpp 200 µm -- 15 m/s 75 kHz --
MSR 45 TTLx5 TTL 200 µm times 5 15 m/s -- 500 ns
MSR 45 TTLx10 TTL 200 µm times 10 9.6 m/s -- 500 ns
MSR 45 TTLx50 TTL 200 µm times 50 4.8 m/s -- 200 ns
MSR 45 TTLx100 TTL 200 µm times 100 2.4 m/s -- 200 ns
Maßverkörperung Stahlmaßband mit aufgezogenem Selbstklebeband
Mögliche Durchmesser
  • ≥ Ø 150 bis 400 mm, werkseitig vorgebogen
  • Über Ø 400 mm, werkseitig nicht vorgebogen
Referenmarke (RI)
  • 25 mm nach Beginn des Messbereichs
  • Zusätzliche Referenzmarken im Abstand von n x 100 mm
Genauigkeit der Teilung (gestreckt) ±30 µm/m
Arbeitstemperatur 0 °C bis +60 °C
Lagertemperatur -20 °C bis +70 °C
Masse (ca.) 25 g/m Stahlmaßband + 17 g Abtastkopf ohne Kabel
Request of Quotation
Contact
MSR 45 MKS

Accessories

  • Anbauhilfe für MSR 40

    Mounting aid MSR 45

    Mounting aid for the scanning head of MSR 45 (diameter-dependent).

  • PG5 - Elektronische Anbauhilfe

    PG5-I electronic test/set-up box

    The PG5-I is an all-purpose signal test box where all the relevant signals are displayed on LCD bars.
    The counting signals, the reference mark signal, and the switch signals are displayed separately.
    The PG5-I allows the quantitative as well as the qualitative evaluation of the encoder signals.

    User Manual: PG5-I Used for linear encoders with TTL output signals

  • PG5 - Elektronische Anbauhilfe

    PG5-U electronic test/set-up box

    The PG5-U is an all-purpose signal test box where all the relevant signals are displayed on LCD bars.
    The counting signals, the reference mark signal, and the switch signals are displayed separately.
    The PG5-U allows the quantitative as well as the qualitative evaluation of the encoder signals.

    User Manual: PG5-U Used for linear encoders with sinusoidal output signals 1 Vpp.

Request of Quotation
Contact
MSR 45 MKS

Downloads

Catalogues
MSR 45
1517.42 kb
Mounting Instructions
MSR 45 MKS
2188.67 kb