Accessories

  • APG 801- Elektronische Anbauhilfe

    APG 801 electronic signal test/set-up box

    Entire function-control via LEDs and LC-display during assembling, to ensure optimal output signals.
    It is possible to monitor the size and quality of the counting signals and the width and position of the RI. 
    The measurement values are displayed on a LC Display.

    User Manual: APG 801 used for linear encoders with TTL output signals
    User Manual: APG 801 - 1 Vpp used for linear encoders with sinusoidal output signals 1 Vpp

  • CB8-150 coupling bar

    Axis distance: 150 mm (other axis distances on request) Included in delivery: 2 hexagon socket screws M8 x 20 ISO 4762 for mounting.

    Suitable for following products:
  • IFB 48 Externe Ein/ Ausgabeeinheit

    IFB 48 external input/output unit

    ID 532900-02

    The Z 300 provides application-dependent additional functions that are available when the IFB 48 is connected
    (e. g.: 4 switching inputs, 9 switching outputs, analog output).
    The external input/output unit is connected to the Z 300 using the touch probe input.
    LEDs show the the power supply, the data transmission and the status of the inputs and outputs.

    Product sheet: IFB 48

    User Manual

    Installation Manual multi-lingual

    Suitable for following products:
  • Anbauhilfe für MSR 20

    Mounting Aid

    Gap unit for the scanning head of MSR 25 (diameter-dependent).

    Suitable for following products:
  • Anbauhilfe für MSR 40

    Mounting Aid

    Gap unit for the scanning head of MSR 45 (diameter-dependent).

    Suitable for following products:
  • PG-U- Elektronische Anbauhilfe

    PG-U electronic signal test/set-up box

    Used for linear encoders with sinusoidal output signals 1 Vpp.
    Function-control during assemling, to ensure optimal output signals.
    The  test box checks all relevant signals; amplitude, phase and offset,
    and displays the results in a qualitative format on a LED display.

    User Manual: PG-U

    Suitable for following products:
  • PG1- Elektronische Anbauhilfe

    PG1-I electronic test/set-up box

    The PG1 is an all-purpose signal test box where all the relevant signals are displayed on LCD bars.
    The counting signals, the reference mark signal, and the switch signals are displayed separately.
    The PG1 allows the quantitative as well as the qualitative evaluation of the encoder signals.

    User Manual: PG1-I used for linear encoders with TTL output signals

    Suitable for following products:
  • PG1- Elektronische Anbauhilfe

    PG1-U electronic test/set-up box

    The PG1 is an all-purpose signal test box where all the relevant signals are displayed on LCD bars.
    The counting signals, the reference mark signal, and the switch signals are displayed separately.
    The PG1 allows the quantitative as well as the qualitative evaluation of the encoder signals.

    User Manual: PG1-U used for linear encoders with sinusoidal output signals 1 Vpp

    Suitable for following products:
  • PG-U- Elektronische Anbauhilfe

    PG2-I electronic signal test/set-up box

    Used for linear encoders with TTL output signals.
    Function-control during assemling, to ensure optimal output signals.
    The  test box checks all relevant signals; amplitude, phase and offset,
    and displays the results in a qualitative format on a LED display.

    User Manual: PG2

    Suitable for following products:
  • PG-U- Elektronische Anbauhilfe

    PG3-I electronic signal test/set-up box

    Used for linear encoders with TTL output signals.
    Function-control during assemling, to ensure optimal output signals.
    The  test box checks all relevant signals; amplitude, phase and offset,
    and displays the results in a qualitative format on a LED display.

    User Manual: PG3-I

  • PG4- Elektronische Anbauhilfe

    PG4 electronic signal test/set-up box

    Function-control during assemling, to ensure optimal output signals.
    The  test box checks all relevant signals; amplitude, phase and offset,
    and displays the results in a qualitative format on a LED display.

    User Manual: PG4

  • PG5 - Elektronische Anbauhilfe

    PG5-I electronic test/set-up box

    The PG5-I is an all-purpose signal test box where all the relevant signals are displayed on LCD bars.
    The counting signals, the reference mark signal, and the switch signals are displayed separately.
    The PG5-I allows the quantitative as well as the qualitative evaluation of the encoder signals.

    User Manual: PG5-I Used for linear encoders with TTL output signals

    Suitable for following products:
  • PG5 - Elektronische Anbauhilfe

    PG5-U electronic test/set-up box

    The PG5-U is an all-purpose signal test box where all the relevant signals are displayed on LCD bars.
    The counting signals, the reference mark signal, and the switch signals are displayed separately.
    The PG5-U allows the quantitative as well as the qualitative evaluation of the encoder signals.

    User Manual: PG5-U Used for linear encoders with sinusoidal output signals 1 Vpp.

    Suitable for following products:
  • PS4- Elektronische Anbauhilfe

    PS4 electronic signal test/set-up box

    Used for linear encoders with TTL output signals.
    In-circuit function-control with LEDs during assembling,
    to ensure optimal output signals.

    User Manual: PS4

  • TMT 14 MK- Bandanbauhilfe

    TMT 14 MK tape mounting tool

    Enables a safe and precise mounting of a steel tape scale.

    Mounting instruction: TMT 14 MK tape mounting tool 

    Suitable for following products:
  • TMT 20 MK- Bandanbauhilfe

    TMT 20 MK tape mounting tool

    Enables a safe and precise mounting of a steel tape scale.

    Mounting instruction: TMT 20 MK tape mounting tool 

    Suitable for following products:
  • TMT 30 MK- Bandanbauhilfe

    TMT 30 MK tape mounting tool

    Enables a safe and precise mounting of a steel tape scale.

    Mounting instruction: TMT 30 MK tape mounting tool 

  • TMT 40 MK- Bandanbauhilfe

    TMT 40 MK tape mounting tool

    Enables a safe and precise mounting of a steel tape scale.

    Mounting instructions: TMT 40 MK tape mounting tool 

    Suitable for following products:
  • Einbaurahmen für Z 300

    Z 300 mounting frame

    ID 532811-01

    For mounting the digital readout Z 300 in a housing or operating panel.

    Suitable for following products:
  • ZE-S DO- Unterteilungselektronik

    ZE-S DO subdividing electronics

    ZE-S DO is provided with two different signal output for the connection of two subsequent electronics. The interpolation electronic divides the sinusoidal voltage signals of a linear encoder. This signals are either outputted as sinusoidal 1 Vpp or converted into square-wave line driver signals. The subdividing electronic units are supplied in rugged housings.